It’s very similar to a machete but has an edge that curves at approximately a 15-degree angle. Very sharp and agile, the kukri is now manufactured on a global scale, with numerous companies producing high-quality blades that function well as tools for all sorts of tasks.
Whether it be cutting through thick shrubs, chopping firewood, hacking down small trees, the blade will without a doubt be the go-to device for anyone that is in need of heavy-duty work outdoors.
Best Kukri Machete Comparisons
|Ka-Bar 2 Kukri||11 1/2||No||Kraton G|
|Cold Steel |
Kukri Plus Machete
|Ontario Kukri Knife||12||No||Fiberglass|
Although Kukris carry the same resemblance, the blade can vary greatly in materials used during the manufacturing of the product. Here’s a comparison of the six products, listing some of the main features that make up their specifications.
The Best Kukris Reviewed
1. Genuine Gurkha Hand Forged Kukri: Best Kukri For Durability And Accessories
This particular blade, known as the Gurkha Hand Forged Kukri, is made to the same standard as what was used by British Nepalese soldiers in the Iraq War. It measures 10 inches in blade length, housed in a tang that extends down to the lower tip. The handle is rosewood and will give you a firm grip when cutting through small branches and shrubs. Keep in mind that it’s completely handmade, giving the kukri a unique look that’s never the same as another blade from the same producer.
Make it Work Better for You
Upon unboxing, you’ll notice that the blade will have an oily substance coated throughout most of steel and wood. Do not panic; this is a necessity that keeps it from accumulating rust during shipments. It takes lots of shipping to get it from point A to B, whereby oxidation would form without any protection.
2. Ka-Bar 2 Kukri: Best Kukri For Balanced Grip
Where things Could be Better
One downside is the sheath. You probably won’t be taking it outside with you. Instead, it’s recommended that you purchase a better one at the same time, if possible. Cracks and uneven stitching is likely. While storing shouldn’t be a problem, it’ll just get in the way and probably break sooner or later. Another annoyance is the handle. It’s not poorly designed by tends to make the palms sweaty very quickly. If you’re using it in the rain, slipping may occur if you’re not careful. But even with these small faults, the Ka-Bar remains suggested when speed is the number one factor for what kukri you wish to buy. Large growth can be cleared away in record time, almost making the experience enjoyable.
3. Cold Steel Kukri Plus Machete: Best Kukri For Experienced Users
And when it does make contact with objects to be cleared away, vibration and bouncing shouldn’t happen. That’s important, especially for first timers that might not be comfortable with handling such a shart and large cutting tool. Additionally, the handle’s shape assists with this, allowing you to change the level of tension and grasp given. It makes the kukri recommended for people that plan on cutting through various types of shrubs such as thick, wet, and dry patches without a change in how much comes down.
Making sure It Stays in Good Shape
Your grip is tighter, and contact with any vegetation thicker than 1/4 of an inch might risk you losing grip altogether. If you think this could happen, wear gloves as a precaution. And the blade’s thickness is on the small side, meaning that dulling will happen in a short period. Get yourself a good sharpener or be prepared to do lots of work helping to keep the kukri in tiptop shape, even when used only once. Allow yourself some time to sharpen after it arrives as well since most of the tools won’t be able to cut through anything initially. Regardless, it’s an acceptable blade that will be a work in progress in order to make it better.
4. Genuine Gurkha Aeof Kukri: Best All-Terrain Kukri
Everything, just like the other blade from the same brand, is handmade and put together in a way that gives it style and beauty that one simply will never find in an ordinary kukri that’s been produced in a factory.
Getting Used to the Weight
The steel comes all the way to the bottom, slightly protruding out from the tang. There’s a small hole in this area that will allow you to place a lace or string through if you need something to keep the blade on your wrists while you work. Weight is gauged at about 1.9 pounds, so it’s a kukri that you might have trouble with if you plan on using it for camping to protect yourself from wild animals.
The sheath looks better than it stores and probably will entice you to purchase a Kydex sheath to wear on your person during outdoor work. In the end, you know you’re getting a real kukri from the motherland of the blade itself-Nepal. And even if you don’t want to use it for that reason, it will without a doubt be a great showpiece in your home that will get lots of attention from family and friends.
5.Ontario Kukri Knife: Best Kukri For Beginners
It’s the blade to use when there’s more than one person who will be working alongside you with the same tool. And the best part is that the edge arrives sharpened already, so there’s less of a burden from having to prepare anything. It’s well rounded and will appeal to those who don’t like to use such a blade or have never tried working with kukris before.
Don’t let it Wear You Down
But like anything, there’s still room for improvements. Upon viewing the product, you’ll notice that the edge bevel may not be identical in texture and size. In order for you to correct this, sanding is required. And the sheath leaves more to be desired than what is given. The belt might break off after only using it once and become irritating by how difficult it is to pull the kukri out when you’re ready to work. Furthermore, you could run into problems when going through brush that other kukris would not have trouble with at all. Sharpening would help, but it still takes lots of energy to cut normally. Anyhow, unless cutting through vegetation is part of your day job, the Ontario should be okay for most people to adapt to and earns a spot on the list for being a breeze to get ready without the hassles of its competitors.
6.SOG SOGfari Kukri Machete: Best Kukri For Light-Duty Work
Cutting or Sawing?
Although the cons are few, they do deserve mention. As mentioned, the back portion of the kukri (where the spin is located) doesn’t have a normal spine. It’s a saw blade that takes up a majority of the rear, save for a few inches where the tip ends, and the bottom meets the handle. If you were to test the saw on a piece of wood, you would see how awkward it feels to do such work. The curve of the blade makes it where it’s nearly useless for sawing since kukris don’t have two handles.
You probably don’t want to cut yourself either, so grasping the steel’s other end is out of the question. Another headache could occur when you attempt to pull it out from the sheath. The saw again makes it difficult to do without willing it out. Its teeth become stuck to the interior and might damage it over time. If you don’t think these issues will bother you or feel that a workaround is possible, then try out the SOG for its ease of striking an excellent handle. It does work, so the product stays true to its primary objective for getting kukri in the first place.
Best Kukri – Buyer’s Guide
Given that there’s a thin line between kukris being a novelty to some and an important working tool to others, care should be given when picking which blade is best suited for your needs. Use the information below to help you narrow down the search for the one that’s most beneficial.
Know the Country of Origin
As mentioned earlier, kukris are not produced and sold throughout the world. It’s a common sight to walk into any outdoor recreation store and see them lined up with other cutting tools, of which many of them will be of various qualities. Although kukris are often made in factories, some are produced entirely by hand.
Nepal is the most renowned place where kukris are created. In fact, the word comes from its national language. Some consumers will only purchase kukris that are made in the South Asian nation, of which is synonymous with the blade and popularly used as an everyday tool there. Most other kukris made in other places still base their design off of what’s found in Nepal, so the closer the blade is to the shape of a traditional blade of this type, the closer it will perform to the standard of blades made from its origins.
Determine How You Will Use the Kukri
Most people that are searching for a kukri will use them for cutting through forested areas that have thin to moderately dense vegetative growth. The blades, when sharp, are designed to cut through such plants without the need of numerous swings. For instance, if you’re using one to clear a pathway for yourself, only one or two hit to the same brush will suffice. At least, to a high-quality kukri blade.
You could also use them for chopping up firewood or wood in general. It’s capable of replacing an ax when the wood being cut isn’t too dense or thick. Still, others simply want one for decorating their home. They make good showpieces due to their large and bold shape. Whatever the case may be, know what you plan to do with the blade before you buy. If using for work, look for a kukri that keeps its balance even on both ends. They are easier to handle and encourage less movement during activity. For display, any blade is possible and is entirely left up to personal preference.
If you’ve ever read a review about a kukri blade before, you may have come across some consumers that have criticized aspects of some blades that were not warranted. For example, many brands ship their blades to customers with the product covered in oil or grease. This is to minimize the amount of corrosion or oxidation. Without it, rust would quickly accumulate on the kukri and make it look unattractive. Some may view this as a turn-off. However, it’s needed since there are few other ways to keep the thick steel looking good after it makes its way from the factory floor to a distributor. Additionally, you will need to get some accessories to sharpen your kukri. It’s easy to do and adds longevity to the device.
All of the kukris reviewed can offer something advantageous to you. But where there were disadvantages, the two Ex Gurkha Khukuri House blades from Nepal come out on top for being the most recommended in terms of strength, durability, and overall quality. But that doesn’t mean the others are poor. There could be something missing from the top choices that are featured on a product made closer to you. Above all, know what you are getting so that your kukri will meet all expectations.